ACME Full HD Indoor IP Camera

Sure! You should use “Smart Life” for Android version 4.1 and iOS version 9.0 and above. 

You should simply press and hold the reset button on the device for 5 seconds to enter the Wi-Fi configuration mode. The rest is easy – just follow the instructions in the app. You can also always refer to the manual provided for a more detailed explanation of the pairing process. 

It’s also very simple – press and hold the reset button on the device for 5 seconds to unpair it from your smartphone or you can simply select ‘Remove Device’ in the device settings menu. 

There are two easy ways to do it: either press and hold the reset button for 5 seconds, or go into device’s settings menu and select ‘Restore Manufacturer Defaults’. 

Of course it does! This IP Camera has infrared night vision with up to 5 meters reach. 

Of course it does! The camera has motion detection with up to 5 meters reach.

Don’t worry! Motion detection is turned off by default. Simply switch it on in the camera settings once you start using the device. 

The device is equipped with two recording modes – event recording mode, which only records when motion is detected, and non-stop recording mode, which records 24/7. 

Of course it is! Go into device’s motion detection settings and set up your schedule there. 

Sure – all the recorded data is stored safely on a micro SD card. However, the card is not included in the package. 

Sure! Our device supports micro SD cards with the capacity of up to 64 GB.

Don’t worry, simply make sure that the micro SD card is inserted when the IP Camera is turned off. Also, please make sure the micro SD card is formatted as FAT32 and that its memory capacity is not higher than 64GB. 

Once the card’s memory is full, the camera will continue recording, but the new data will be saved over the oldest recorded data.

Unfortunately, due to security reasons, the recordings can only be viewed on the mobile application. However, If you want to transfer the videos to your computer, go to the playback menu and select record button to save the desired video segment. This can later be found in your phone’s storage and transferred to the computer.

The answer is yes, it can! You can easily fix the camera’s base cover to the desired surface with the help of screws and anchors included in the package. For more details, please refer to the user’s manual, which comes with the camera. 

Of course it is – simply go to the camera’s Basic Function Settings and turn on Flip Screen option, easy!

Yes, it is! You can connect to your camera from whichever location you are at, by using the free “Smart Life” app for smartphones and tablets. Just make sure to have your mobile device connected to the Internet or your local wireless network. 

Don’t panic, simply check if your internet connection works fine or place the camera closer to the router. Last but not least – you can always try restarting the mobile app!

Good news – yes it is! This camera has a built-in microphone and a speaker, which can be used for two-way audio communication.

Don’t worry, the issue is simply to do with different routers. Make sure that the router you are trying to connect to has a port forwarding enabled to access the device. If that’s a bit too complicated for you to do, maybe get in touch with your network provider. They should be able to guide you step-by-step.

Unfortunately it isn’t, since the IP Camera was designed to be used specifically with smartphones – both Android and iOS devices. 

Of course! Simply hold down the reset button for 5 seconds or remove the device from the app to reset the connection. Once you’ve successfully finished resetting the IP Camera, follow the Wi-Fi setup procedure in the “Smart Life” application. 

Good news – the camera will definitely continue recording even when the Wi-Fi connection is lost. However, the live stream will stop working. Once the Wi-Fi connection is back on, the camera will continue operating in a usual mode. 

Not to worry. Just make sure that the motion detection is turned on in the camera’s settings menu. 

Of course it is! The way it works is as follows: the user account, which initially sets up the IP Camera and connects it to the Wi-Fi network is the owner and the primary account. In order for other users to gain control over the Camera, the ‘owner account’ must ‘share’ the device with them, which can be done in the “Smart Life” app settings. This way, another user gains control over the IP Camera without going through the whole set-up process. 

Unfortunately, the answer is no. The IP Camera only supports the 2.4GHz Wi-Fi network. 

Don’t panic! You need to check a few things before it is connected again. First of all, make sure that your device is connected to a 2.4 GHz Wi-Fi network, since 5 GHz Wi-Fi network is not supported. Secondly, make sure that the device is within the range of the Wi-Fi network, which also has a strong signal. Finally, make sure that your wireless router/access point or the network provider is not blocking the P2P (peer to peer) networking. That’s all! 

Don’t worry, once the power is back on, the IP Camera will continue working as per settings you’ve set up. 

That’s very simple – you can check the status of the IP Camera by using the “Smart Life” application.

Unfortunately, the answer is no, since the Camera was designed for indoor use only. 

GDPR is intended to protect the fundamental privacy right of EU data subjects and the security of personal data, and we can fully confirm that our platform is ready for GDPR compliance assessment. 

It’s very simple – first of all, choose Direction function in the live camera stream menu. Then you can use arrows on the screen to turn your camera in the chosen direction, or alternatively you can control camera by swiping the screen in the live stream section.